20th Dec 2022
EDS Technologies Participated in International Automotive Manufacturing Summit 2022
Electric Vehicles are changing the automotive industry landscape in India. Technology is an essential piece while organizations design and manufacture EVs and enable its support system. To speak on this disruption, Srikumar Maganti, General Manger – Technical was invited as a panelist in the discussion on “Indian EV Eco System – The Challenges & Opportunities in IAMS – International Automotive Manufacturing Summit 2022, 4th Edition, Pune on 20th December 2022. This was organized by Efficient Manufacturing. He emphasized on the value of Virtual Prototyping, Virtual Simulations and Collaborative Product Development through PLM practice for EV start-ups. Adoption of EVs and Constraints in the EV Eco system, streamlining of EV Supply Chain, Reliability and sustainability models for EV Start -ups was also discussed in the forum. The subject of Digitalization, Industry 4.0/5.0, IIOT and AI/ML role for Cleaner, Safer and Futuristic mobility was deliberated by fellow panelists during the panel discussion.
20th Dec 2022
EDS Technologies participated in the MEAI MEGECON Geologists Conference 2022
EDS Technologies participated in the MEAI MEGECON Geologists Conference 2022 which took place in Hosapete on the 20th and 21st December, 2022. In the conference, eminent Geologists across the country gathered together to discuss their thoughts, share ideas and recent innovations in the field of geology associated with the mining industry in India.
Read More
The chief guest for the event, Mr. Debkumar Bhattacharyya, Deputy Director General, GSI visited our stall and interacted with our experts.
EDS technologies showcased the GEOVIA solutions from Dassault Systèmes which generated some great interest from the visitors. There were some good interactive engagements with mining professionals across several regions and also expand our knowledge of geology by discussing with the subject experts.
Read Less
19th Nov 2022
EDS Technologies showcased its Mining Solutions Portfolio at the 17th edition of CII IMME
EDS Technologies, a leading technology solutions provider in India in the mining segment, participated with a stall at the International Mining & Machinery Exhibition organized by CII from 16-19 November 2022 in Kolkata.
Read More
Various dignitaries from the mining sector held discussions with our senior consultants on how mining solutions from Dassault Systèmes helps mining organizations to achieve their sustainability and governance goals. There were insightful discussions with senior geologists and mining specialists at the event. There were demonstrations on GEOVIA solutions from Dassault Systèmes and its application for tactical mine planning, scheduling, production management, enhanced safety, predictability, efficiency and sustainability of mines.
Read Less
13th Nov 2022
EDS Technologies displayed its EV Solutions Portfolio in the India International EV Show
EDS Technologies was excited to be associated with the India International EV Show in Pune held from 13 – 15 November, 2022. The entire EV ecosystem, from EV OEMs to battery manufacturers to system integrators participated in the show.
Read More
EDST displayed various solutions from Dassault Systemes which would help EV OEMs and component manufacturers in bringing their products faster to the market.
Team EDST met some eminent EV innovators and start-up founders and discuss how the solutions would help these entrepreneurs in accelerating their business growth.
Read Less
9th Nov 2022
EDS Technologies Participated in MCCIA’s Pune Manufacturing Expo
EDS Technologies participated in the Pune Manufacturing Expo 2022 hosted by the Mahratta Chamber of Commerce Industries and Agriculture (MCCIA) from 7-9 November 2022. EDST showcased solutions for manufacturing companies from design, simulation and digital manufacturing to project management. Our consultants had discussions with leaders from manufacturing organizations on how Dassault Systèmes solutions can help them in reducing their design cycles, achieving lean production run and display all the ongoing projects in a single platform. There were fruitful discussions with MCCIA executive committee members as well.
13th Oct 2022
Accelerating Manufacturing Innovation with Virtual Twin Experience
The future of manufacturing is based on the concept of smart factory which interconnects machinery and systems on production sites. EDS Technologies participated in a webinar hosted by Efficient Manufacturing (EM), the media house which mainly caters to discrete manufacturing industries. The topic was “Accelerating Manufacturing Innovation with Virtual Twin Experience”.
The keynote speaker was Mr. Sudhir Gurtoo, Managing Director, Leadec. He was accompanied by subject matter experts, Mr. Sanjeev R, Business Consultant, Manufacturing & Infrastructure – Dassault Systèmes & Mr. Murali Krishna Kumar, Senior Application Engineer, EDS Technologies.
Read More
The subject matter experts spoke on how to facilitate better synchronization across all manufacturing activities, improve manufacturing assets efficiency and develop operation skills. Challenges to manage customers’ demands, improve delivery times and cost optimization to improve margins were also discussed. Measures to improve quality, speed and Agility was elaborated and guidelines on to increase efficiency were highlighted.
Watch the webcast here: https://youtu.be/E0JJwu18GVk
Read Less
22nd Sep 2022
EDS Technologies conducted a Workshop on Application of Mine Planning Software in NMDC
EDS Technologies conducted a Three-day workshop on Application of Mine Planning Software from 20th to 22nd September, 2022. The Workshop was conducted in association with NMDC Limited. The Chief Guest of the event was Shri B. Sahoo and was attended by mining engineers, surveyors and geologists.
On the first 2 days, NMDC teams from different locations gave presentations on Application of Mine Planning software. Another session on Application of Geostatistics was done by Dr Kamlesh Rao. This was followed by Mine Process Flow presentation by EDS Team. New and updated features in Surpac and MineSched and how these will help improve the productivity of mining organizations were also discussed. The workshop was well attended and appreciated by NMDC team.
15th Sep 2022
Industrial Connect by EDS Technologies in the Bommasandra and Hosur Industrial Areas
As part of our customer connect & to showcase technology-led improved user experience, EDS Technologies hosted events in the industrial area of Bommansandra and Hosur.
The consultants from EDST showcased how a unified platform can help enhance organizations’ business value. There were also customer talks on how the solutions from EDST immensely helped their organization and outlined the future road map to extend it across multiple locations and departments. The events were a great opportunity to network, sharing of specific challenges and success stories.
16th Sep 2022
EDS Technologies organized a Technology Session on UAV Simulators in association with SIATI
EDS Technologies conducted a Technology Session on UAV Simulators on 16 September 2022. The session was conducted in association with Society of Indian Aerospace Technologies and Industries (SIATI) and was attended by dignitaries from defence public sector units and private aerospace & defence organizations.
The session had speakers from NAL and ADE who spoke on the importance of UAV, simulators and how they help in accelerating design and development of UAVs. The subject matter experts from EDST then spoke on UAV Simulators. This was followed by a hands on demonstration of the UAV Simulator wherein many of the dignitaries experienced the simulator technology.
14th Sep 2022
MIT WPU signs up with EDS Technologies for Skilling
EDS Technologies signs up with Dr. Vishwanath Karad MIT World Peace University (WPU) in the field of mechanical engineering and civil engineering for its students and researchers.
Through this partnership, EDST aims to skill the students of MIT WPU on the latest emerging technologies like Geographic Information System, Additive Manufacturing and Industry 4.0 along with CAD, CAM, CAE, PLM.
As part of this collaboration, a MoU was signed between Dr. Prashant Dave, Registrar, MIT WPU and Mr. Ravi Kiran Y, Chief Strategy Officer, EDS Technologies.
26th Aug 2022
EDS Technologies participated in the CII Manufacturing Innovation Conclave
EDS Technologies participated in the Manufacturing Innovation Conclave organized by CII on 26 Aug 2022. The Conclave was attended by dignitaries from government and industry.
EDS Technologies had put up a stall showcasing its solution on Lean Manufacturing, DELMIA 3DLean and how it helps organizations to reduce cost and increase productivity.
A modern, interactive solution accessible to everyone on the cloud, DELMIA 3DLean provides value to teams working in any function, as well as cross-functional teams. This solution provides the framework to guide collaboration and improve team performance, enabling all team members to explore new ways to solve problems and improve operational issues with the ability to visualize rich 3D content and data. Anchored in the principles of Lean Manufacturing – customer first, where people are the most important value, and the drive for operational agility and continuous improvement – this innovative solution, via the 3DEXPERIENCE platform, enables teams to address operational waste, variability and efficiency.
Read more about DELMIA 3DLean here: http://edstechnologies.com/delmia/3d-lean/
14th Aug 2022
EDS Technologies showcased its Mining Solutions Portfolio at the National Mining Conclave 2022
EDS Technologies, a leading technology solutions provider in India in the mining segment, participated with a stall at the National Mining Conclave organized by Mines Safety Association Karnataka on 12 and 13 Aug 2022.
The chief guest of the conclave, distinguished delegates from various Directorate General of Mines Safety (DGMS) and top mining organizations in India visited our stall and held discussions with our senior consultants on how mining solutions from Dassault Systèmes helps mining organizations to achieve their sustainability and governance goals. There were insightful discussions with senior geologists and mining specialists at the event. There were demonstrations on GEOVIA solutions from Dassault Systèmes and its application for tactical mine planning, scheduling, production management, enhanced safety, predictability, efficiency and sustainability of mines.
30th July 2022
EDS Technologies participated in the 7th ADMS 2022
EDS Technologies participated in the 7th Aerospace and Defence Manufacturing Show on 28 July 2022 and 29 July 2022. The event saw overwhelming response from the aerospace industry and from the armed forces. EDST put up a stall in partnership with Dassault Systèmes.
EDS Technologies showcased solutions focusing on engineering simulation, composite materials and digital twins for the aerospace and defence industry. It brought about some significant viewpoints from leaders from the armed forces.
20th July 2022
Telangana Academy for Skill and Knowledge (TASK) partners with EDS Technologies
Telangana Academy for Skill and Knowledge (TASK) partners with EDS Technologies (EDST) to bring a variety of courses in the field of mechanical engineering and civil engineering for TASK registered students.
Through this partnership, EDST aims to skill the students of various academic institutions on the latest emerging technologies like Additive Manufacturing, Geographic Information System, Digital Manufacturing and Industry 4.0 along with CAD, CAM, CAE, PLM.
Read More
TASK has also endorsed EDST as industry partner for select initiatives for TASK registered institutions.
The partnership was signed between Mr. Shrikant Sinha, Chief Executive Officer, TASK and Mr. Karthikeyan V, Chief Technology Officer, EDS Technologies. Mr. Karthikeyan spoke on the importance of skilling for engineering students and how EDS Technologies through its e-Learning platform is aligning with industry bodies and government agencies to bring about these skilling courses to a wide student base across the country.
EDST e-Learning has rich content which is carefully curated and structured after extensive discussions with EDST Experts, academia and industry bodies. Registered students will have access to more than 130 courses in mechanical engineering comprising more than 500 hours of learning content. The students will also benefit from DIY exercises and remote on-demand support from our trainers.
Discover the courses offered by visiting www.edstelearning.com website. For more information, please contact helpdesk@edstelearning.com
Read Less
18th July 2022
EDS Technologies participated in the Air and Missile Defence Seminar and Exhibition
EDS Technologies participated in the 8th edition of Air and Missile Defence Seminar and Exhibition organized by Indian Military Review at Air Force Auditorium, New Delhi. Distinguished guests from the armed forces and the industry attended the exhibition. EDST had put up a stall at the exhibition displaying our expertise in the field of military simulation and training solutions and geographical mapping solutions particularly for the defence industry.
Read More
The Chief of Air Staff of the Indian Air Force, Air Chief Marshal Vivek Ram Chaudhari visited the stall where EDST’s experts showcased the solutions and capabilities to him. Various distinguished guests from Indian Army, Indian Navy and Defence PSUs also visited the stall and had a discussion about the offerings. Guests from the industry visited the stall as well.
Read Less
22nd June 2022
EDS Technologies along with EOS Participated in IMTEX 2022: Asia’s Largest Machine Tool Exhibition
EDS Technologies participated in IMTEX 2022 from 16 June 2022 to 21 June 2022 under the theme of “Additive Manufacturing”. IMTEX is Asia’s largest machine tool exhibition and saw many machine tool manufacturers participate in this year’s exhibition.
Read More
EDS Technologies along with EOS showcased Additive Manufacturing technology and solutions for industry. Many metal and plastic additive manufactured parts were displayed in the stall. The highlight among them was a rocket thruster which was completely manufactured by an EOS metal 3D printer. A live polymer 3D printer was also set up at the stall and a few parts were 3D printed during the course of the exhibition.
Read Less
21st May 2022
EDS Technologies participated in EXCON 2021 event – the largest construction equipment event in South Asia
EDS Technologies participated in EXCON 2021 from 17 May 2022 to 21 May 2022. The event touted to be the largest construction equipment event in South Asia saw overwhelming response from the industry. EDST put up a stall in partnership with Dassault Systèmes under the France Pavilion in collaboration with Indo French Chamber of Commerce and Industry (IFCCI).
Read More
EDS Technologies showcased solutions focusing on engineering simulation and digital twins. Quite a lot of interest was also generated around metal and polymer 3D printer solutions. It also brought about some significant viewpoints from the industry leaders.
The event was graced by distinguished guests from the government, industry and media. Honourable CM of Karnataka, Mr. Basavaraj Bommai inaugurated the event along with Gen. V.K. Singh (Retd), MoS, Government of India.
Our President on EXCON 2021: “The importance of AI, ML and IoT is recognized by the construction equipment industry segment as the industry moves towards digitalization”.
President’s message on EXCON 2021
Read Less
8th April 2022
EDS Technologies participated in Advanced Materials for Defence and Aerospace Webinar
EDS Technologies participated in the Advanced Materials for Defence and Aerospace Webinar and Virtual Exhibition conducted by Indian Military Review. Distinguished guests from the armed forces and the industry attended the webinar. EDST had put up a virtual stall displaying our expertise in the field of additive manufacturing.
Read More
Mr. Reghuprasad R from EDS Technologies and Mr. Joe Ajay Alphonse, additive manufacturing expert spoke about how 3D Printing can be beneficial to our armed forces in their indigenization journey to make India self-reliant. The expert also spoke on various printing machines that can be used by our defence companies, the materials used in these printers and the advantages the armed forces and defence companies accrue by using end-to-end 3D printing solutions from EDS Technologies.
Read Less
8th April 2022
EDS Technologies participated in the concluding ceremony of the Mines Environment & Mineral Conservation (MEMC) Week in Raipur
The concluding ceremony of Mines Environment & Mineral Conversation (MEMC) Week under the aegis of Indian Bureau of Mines, Regional Office, Raipur was held at Naya Raipur, Chattisgarh. EDS Technologies, a leading technology solutions provider in India in the mining segment, participated with a stall at the occasion.
Read More
Shri Sanjay Lohia, IAS, Additional Secretary, Ministry of Mines and the Chief Guest for the event visited our stall and held discussions with our senior consultants on how mining solutions from Dassault Systèmes helps mining organizations to achieve their sustainability and governance goals. There were insightful discussions with senior geologists and mining specialists at the event. There were demonstrations on GEOVIA solutions from Dassault Systèmes and its application for tactical mine planning, scheduling, production management, enhanced safety, predictability, efficiency and sustainability of mines. There were senior officials from Indian Bureau of Mines and lime stone mining companies engaging with our consultants with respect to GEOVIA applications on mining.
Read Less
16th March 2022
NIT Srinagar conducted a simulation workshop in association with EDS Technologies
EDS Technologies conducted three days training and a workshop on “Dassault Systèmes’ Simulation Solutions” on 16 March 2022 at NIT Srinagar. Our Solution Consultant, Mr. Varun Sharma delivered sessions on SIMULIA products, its features and applications across various industries like automotive, aerospace, EV to name a few.
Read More
During the workshop, the participants from NIT Srinagar were trained on “Abaqus Unified FEA” product suite which offers powerful and complete solutions for both routine and sophisticated engineering problems. The topics covered ranged from finite element analysis, fatigue and durability analysis to parametric and non-parametric optimizations.
SIMULIA product suite covers a vast spectrum of industrial applications. For example, in the automotive industry, engineering work groups can consider full vehicle loads, dynamic vibration, multi-body systems, impact, crash, nonlinear static, thermal coupling, and acoustic-structural coupling using a common model data structure and integrated solver technology in the SIMULIA suite.
EDS Technologies is one of the largest technology solutions providers in India enabling organizations transform their business through cutting edge technology adoptions. As part of academia outreach, EDS Technologies helps academic institutions to bridge the industry-academia divide by providing industry relevant engineering applications. Through these solutions, students and researchers gain first-hand knowledge of how technology is applied in product design, analysis and manufacturing departments.
Read Less
16th March 2022
EDS Technologies participated in the 7th ACMA Technology Summit in New Delhi
EDS Technologies participated in the 7th ACMA Technology Summit and ACMA Atmanirbhar Excellence Awards in New Delhi on 16 March 2022. The theme of the summit was “Driving Mobility through Technology, Digitization & Sustainability”.
Read More
EDST showcased various solutions covering right from design, analysis and project management to manufacturing. Quite a lot of interest was also generated around how EDST’s EV customers adopted cutting edge solutions which helped them to reduce design time and accelerate time-to-market. Metal and polymer 3D printed parts were also showcased at the stall which garnered a lot of attention and brought about some significant viewpoints from the industry leaders.
The summit was graced by distinguished guests from the government, industry and media. The Honourable Minister for Heavy Industries, Government of India, Shri Mahendra Nath Pandey visited and appreciated EDS Technologies for actively contributing to Make in India and Atmanirbhar Bharat initiatives. Honourable Minister for Commerce and Industry, Government of India, Shri Piyush Goyal spoke about how innovation in auto sector could lead to a self-reliant India.
Nearly 150 members from the industry attended the summit.
Read Less
4th March 2022
EDS Technologies recognised as Dassault Systèmes Platinum Partner for fifth time in a row
EDS Technologies is recognized as Dassault Systèmes Platinum Partner for its contribution and overall performance in 2021. This is the fifth time in a row that EDST has achieved the Platinum Partner status. At Dassault Systèmes India Value Up event, Mr. Senthil S, President, EDS Technologies received the platinum partner award for business and technical expertise and for enabling organizations to create delightful experiences for their customers. EDS Technologies thanks Dassault Systèmes for the honour and its customers for placing their trust and confidence.
Read More
It was awards galore for EDST at the Value Up event. Mr. Guruprasad won the performance award for “Sales Excellence”. Mr. Arun Prasad won the “Excellence in 3DEXPERIENCE Deployment” award. “Technology Consulting Excellence” award was bagged by Mr. Vivek Sirohi and Mr. Reghuprasad R won the “Marketing Excellence” award.
Over the past 27 years, EDS Technologies has been maintaining the leadership position in the digital transformation space. EDST has enabled organizations in multiple industry verticals including aerospace, automotive & supply chain, defence, engineering service providers,etc. with Dassault Systèmes’ 3DEXPERIENCE platform solutions.
Read Less
24th February 2022
EDS Technologies participated in the Electric, Connected and Autonomous Vehicle Summit at Chennai
EDS Technologies participated in the Electric, Connected and Autonomous Vehicle Summit organized by CII in partnership with Guidance Tamil Nadu. The theme of the event was “Intelligent Vehicles – Enabling Technologies and Future Developments”.
The event discussed the current and future trends in Electric, Connected and Autonomous Vehicles and the opportunities for stakeholders they provided to establish synergy in the special area of interest.
Read More
The event provided a platform for stakeholders like Industry experts from Automotive and allied sectors, technology providers, researchers and many more to present and discuss the most recent advances, innovations, trends, and concerns as well as practical challenges encountered and solutions adopted in the fields of Electric, Connected and Autonomous Vehicles.
Our Senior Vice President – Technical, Mr. Karthikeyan V participated in the panel discussion and shared his thoughts on the opportunities and challenges for Electric Vehicle manufacturers in India.
Nearly 200 senior management personnel from diverse industries all over India attended this summit.
Read Less
