There are multiple ways to save a document in CATIA V5. It sometimes depends on organization guidelines. In this blog, multiple options of saving a document in CATIA V5 are discussed. For saving a CATIA V5 document, three options are available. Click on Tools ā Options ā General ā under General tab ā Data Save to access…
Every organization has its own standards and requirements when it comes to designing in CATIA. To adhere to these standards and requirements, some changes need to be made in the software application settings. In this article, setting up of global environment using customization setting from single source is explained in detail. Introduction: From selecting license while opening…
When the setup application is launched, Some times CATIA V5-6R2019 GA installation crashes out immediately. This is due to the bug reported in the original installation launcher. In this blog, we learn how to resolve this error while installing CATIA V5 R29 GA. What is the CATIA V5 R29 GA installation error? While installing CATIA V5 R29…
Introduction: There is always a challenge to meet the high expectations of auto and aero industry when it comes to the parts. The suppliers need to maintain industry standard accuracy and precision in these parts. These parts undergo processing to achieve the desired component dimensions keeping their end application in mind. One has to also go through…
During designing a rubber component, multiple factors need to be taken care of. These factors are as listed: material considerations with required technical specifications and also as per applicability and function, radius and wall thickness, gate location in mould, rib inclusion, mould shrinkage and draft. Basic Design Aspects (Wall Thickness, Radius, Draft) While designing rubber components, some…
EmbossingĀ is a metal formingĀ processĀ for producing raised or sunken designs or relief in sheet metal by means of matched male and female roller dies, theoretically with no change in metal thickness, or by-passing sheet or a strip of metal between rolls of the desired pattern. Steps to create embossing/engraving in CATIA V5: In the first step, open a…
