Introduction: There is always a challenge to meet the high expectations of auto and aero industry when it comes to the parts. The suppliers need to maintain industry standard accuracy and precision in these parts. These parts undergo processing to achieve the desired component dimensions keeping their end application in mind. One has to also go through…
During designing a rubber component, multiple factors need to be taken care of. These factors are as listed: material considerations with required technical specifications and also as per applicability and function, radius and wall thickness, gate location in mould, rib inclusion, mould shrinkage and draft. Basic Design Aspects (Wall Thickness, Radius, Draft) While designing rubber components, some…
Embossing is a metal forming process for producing raised or sunken designs or relief in sheet metal by means of matched male and female roller dies, theoretically with no change in metal thickness, or by-passing sheet or a strip of metal between rolls of the desired pattern. Steps to create embossing/engraving in CATIA V5: In the first step, open a…
The dimensions in a 3D Model have some relationships or interconnections with each other in Parametric Modelling in CATIA V5. If any one of the dimensions is changed in 3D Model, then all other dimensions will also change in the specified ratio. Key tools used in Parametric Modelling are: Parameters Formulas Design Table Parameters Parameters are the…
Why should 3DEXPERIENCE be connected with Microsoft Office 365: To enable the user to get email notifications for password reset and for all the tasks for which the user must be notified, 3DEXPERIENCE needs to be connected with Microsoft Office 365. The challenge in connecting 3DEXPERIENCE with MS Office 365 is that MS Office 365 only authenticates…
