1) What steps need to be performed for changing CATIA interface back to English language? Refer to the figure below.
a)Select English option in the Regional & Language Options Dialog box. (I.e. Operating System Setting)
b)Reinstall CATIA with English language option selected.
c)Reinstall operating system
d)Change the Language settings in the Options dialog box of CATIA V5
e)Change the user interface language setting in the Customize dialog box of CATIA V5.
2) Can the windows compliant options like Drag, Drop, Cut, Copy, and Paste disabled in CATIA V5?
- No, It cannot
- It can be disabled only by changing the Operating system
- It can disabled by Changing the settings in Standards dialog box
- It can be disabled using the Tools > Options dialog box.
3) A body created using Part Design module can be converted into Sheetmetal. Select the appropriate statement to support this.
- Only if the Thickness of the Part body is variable
- Only if the Thickness of the Part body is constant and less than the thickness specified in Parameters tab of the Sheetmetal Parameters Dialog box available in the Generative Sheetmetal Design Workbench
- Only if the Thickness of the Part body is constant and more than the thickness specified in Parameters tab of the Sheetmetal Parameters Dialog box available in the Generative Sheetmetal Design Workbench
- Only if the Thickness of the Part body is constant and equal to the thickness specified in Parameters tab of the Sheetmetal Parameters Dialog box available in the Generative Sheetmetal Design Workbench
4) What are the tools used to create the A & B features as shown in the sheet metal part below.
| a) |
A - Surface Stamp |
B - Bead |
| b) |
A - Curve Stamp |
B - Bead |
| c) |
A - Louver |
B - Bead |
| d) |
A - Surface Stamp |
B - Curve Stamp |
5) What is the Usage of Knowledge Template 1 (KT1) License of CATIA V5?
a) KT1 is used for applying rules in the design process
b) KT1 enables the insertion of Product Knowledge Templates created by PKT
c) KT1 is used for the birectional associativity between Part Design and Drafting
d) KT1 license enables Tri directional associativity between Part Design, Assembly Design & Drafting
