| YOUR BUSINESS FIRST |
| |
Digital verification saves time and costs
The EU-Directive 2008/2/EG regulates the di-mensioning of the sight field and the windshield wipers for agricultural or forestry tractors uniformly for all EU countries. With RAMSIS you can now ensure the correct compliance with this Directive, already in the CAD design phase for all your vehicle models. |
| |
RAMSIS displays the sight field geometrically and makes the development in line with the directive easier by verification and correction on a digital vehicle model. From the results, you can then quickly and productively draw conclusions about necessary modifications of your models.
The limit values of the Directive as well as all examination methods are stored in RAMSIS. The examination results can always be reproduced without problems for different vehicle versions.
Your benefit:
> Quick examination of vehicle versions during construction
> High accuracy and checking of the standard compliance, already at a very early development stage
> Direct display alert in case of infringement of the Directive
> Reduction of the physical test performances
> Simple documentation of the test performance and com-prehensibility of the results
> Reduction of the development period and costs |
| |
| VERIFICATION WITH RAMSIS ACCORDING TO 2008/2/EG |
| |
Simulation of the sight field
In the CAD-model of the tractor – including all relevant add-on components – RAMSIS simulates the real sight field for your vehicle model. Our software creates the sight field geometrically on the basis of the driver’s sitting position according to the Directive and displays it in the three-dimensional environment of the vehicle. Windshield and wipers are also considered therein.
Sight field analysis
The sight field is automatically assessed in the digital simula-tion and checked against the criteria of the Directive. In-fringements of the standard will be quickly detected. Thus, with the new RAMSIS module you can assess the required corrections in the construction and carry them out effectively. Also, the results will be documented comfortably and quickly in digital form. |
Digital Directive 2008/2/EG in RAMSIS
|
USING THE NEW MODULE |
Software and service
Good news for everyone who is already using RAMSIS for ergonomic studies: The new module can be integrated into the already existing version without any problems. A training regarding the module and its most important functions is recommended and is offered by Human Solutions.
New customers can use the module together with RAMSIS Industrial Vehicles – either as stand-alone-software or integrated in CATIA V5. By help of our coachings and trainings you can promote the productivity of development and construction. Alternatively, we also offer you the verification of your vehicle models as a service. |
| |
For more information log on to www.edstechnologies.com
To Know more, write us at : marketing@edstechnologies.com or Call us at : 1800 425 3378 |
